My shoppingg experience buying Dell inspieon E1505 accessories

My shoppingg experience buying Dell inspieon E1505 accessories

Two month ago, my Dell E1505 battery failed after its 1 year warranty. So I should buy a new one for my coming holiday in Hawaii. Now I will never shopping in Ebay or Amazon. As you know you buy someone there, and no guarantee of the product, also the money refund is impossible. And you can not cancel the order. So I decide use my paypal to buy the Dell inspiron E1505 battery.

I searched the Inspiron E1505 Battery in google and found search resault. Then I click some of them, after long time comparison I order a battery from http://www.discount-laptopbattery.com as Its price and 30 days money back and one year quality warranty. After 7days I recevied the battery and below is my battery using experience:

I was getting three red flashes and one green flash continuously on the battery light on the lower right side of the lid which according to the manual means defective battery which turned out to be true. I trashed the cheap Latitude D820 Battery (which I noticed was rated at 5200 ma vs the rating of 7200 on the Amazon battery)because I did not save the receipt. I am thrilled with this battery which is giving me about 3 hours before needing a charge, and charges to 100% overnight with no problem.

It works well with my 1505. I got 4 + hours out of this per charge. Saw some other people having problem with recognizing the batteries. When I was doing research for purchasing a replacement Latitude D620 Battery, I came across a lot of discussions online about Dell laptop not recognizing batteries. I wonder if that is a common issue with Dell. Luckily, mine has no problem. Everything is good. As long as it can last 1 year or so, It would be worth the money spent.

Owned for 5+ months. I am pleased with this Latitude D830 Battery I was glad to find it at a price much lower than Dell was selling it. It was a great buy. Product came right when I needed it and has worked great for me! Good battery life.

In all The battery is compatible and works well with the Vostro 1000. Instructions are confusing. I simply installed and followed good battery practices – completely charged the battery, completely drained the battery, then repeated.

In the end I saw some New batteries in this online shopping are in 35% price discount as the Merry Christams Day coming. I list them below with the brands:

Apple : A1008 Apple A1061 Apple A1148 Apple A1057 Apple iBook G4 12 inch battery Apple iBook G4 14 inch battery

Dell: Dell D5318 Dell 75uyf Dell C1295 Dell U4873 Dell Y9943 Dell G5266 Dell PC764 Dell GW240 Dell hd438 Dell KD186 Dell Y9943 Dell RN873 Dell TC030 Dell Inspiron 1721 Battery Inspiron 1521 Battery Dell Inspiron 1526 Battery Dell Latitude D520 Battery Dell Latitude D430 Battery Dell Latitude D810 Battery Dell XPS M140 Battery

HP & compaq: Pavilion DV5000 Battery HP Pavilion dv8000 Battery HP HSTNN-IB17 HP HSTNN-LB31 HP BP994A Compaq EVO N400c Battery Compaq EVO N410c Battery Compaq EVO N400 Battery Compaq EVO N410 Battery Compaq Evo N600 Battery Compaq Evo N600C Battery Compaq Evo N620C Battery Compaq Evo N610C Battery

IBM: IBM ThinkPad R61 Battery IBM ThinkPad T61 Battery IBM Thinkpad X61 Battery IBM Thinkpad X61S Battery LENOVO 40y6795 Lenovo 40y6797 IBM 40Y7003 IBM 40Y7001

Sony: PCGA-BP2EA VGP-BPS3A VGP-BPS4A Sony VGP-BPS8 VGP-BPS9 VGP-BPS9/B Sony VGP-BPS9A Sony VGP-BPS9A/B

In the end I hope you can find the best battery there as me.

Repair battery step one : calibrate your cell

Repair battery step one : calibrate your cell

First of all, the test voltage to zero, the machine can not start naturally, can not use power when charging (the battery light does not shine).

Disassemble the battery, more or less talk about the situation inside the battery.

Battery in a total of 9 can be placed 18 millimeters in diameter, length 65 mm core CGH18650 models the location of lithium batteries, Panasonic’s 22 batteries in parallel, three groups of series (OK, then my new Latitude D620 battery, the same, it appears that is 6), there is a very fine control with a single chip – the protection of the circuit, the circuit to the computer a total of five output contacts, respectively, are negative, the clock and data.

First of all, check the sticky in the battery temperature detection probe (temperature resistance), and temperature protection insurance, are also normal. Test-retest the battery voltage of each group, in which two sets of battery voltage of 3.8V, normal; a battery voltage of 0V, appear to have lapsed. The total battery voltage of 7.6V, then the failure of the battery pack has not yet open, then measuring the internal resistance was very small, almost in a state short-circuit.

First of all, failure to deal with Thinkpad T60 batteries, battery repair based on previous experience, the failure of the battery may not be completely damaged, can be activated through a number of methods, in particular the performance of state for the short-circuit the battery. The voltage of the battery to 0 with one end connected to the circuit board off line to avoid damage to circuit boards in operation. Open-circuit battery voltage after the re-survey, is still 0V, ruled out the possibility of short-circuit boards.

For short-circuit the battery failure, the method is more effective high-voltage electric current moment method, using the old IBM power supply (my back-up power), 16V maximum 3A output string on the multimeter (a tributary of the current file 20A), first negative power supply Even with the battery anode, and cathode power multimeter then red table pen, table pen with black multimeter battery cathode touch, speed, faster as far as possible, the former two degrees to see the multimeter has reached close to the 2A (moment) and the third on only 0.4 A about an immediate stop, measure the battery voltage has been restored to about 3V, the internal battery short-circuit that point has been an instant high-current boil (If you do not damage the battery to stop immediately, even if so, battery life and capacity have been the impact, if conditional, or recommend replacement, but if the replacement, then try to replace the entire battery pack are). However, the batteries need to be a separate charge (if the battery charge of the whole group, this will result in the other two groups had mesenchymal cells), plug in the charger to start charging ammeter to monitor during the charge current to 500mA or so, current for the 3.6AH battery pack is small, but the charger is the charge current is limited and a small current to the xps m1330 battery charge is good for the resumption. After about six hours, the charger showed the battery is already full, continue to re-charge for about two hours, remove the battery, measure voltage has reached 4.2V, with bright halogen bulb in the flashlight (3V, 500mA) to discharge its , bulb sharp discharge current of 700mA, the battery pack that has been basically restored, continue to discharge until the battery voltage down to 3.8V, the purpose of the two groups with the same battery voltage, charging time together so as not to overcharge the Back to the whole battery pack battery circuit welding.

Since the inspiron 6400 battery voltage while the circuit board there is no output, then, surely have damaged circuit boards, after observation, negative input circuit board (take battery) output (then output contact) is directly connected, and the positive input and output of by a high-power thyristor control, the thyristor remains cut-off state, that is, the control circuit has not been output control signals to the SCR control terminal, or simply the SCR has been destroyed. (Measured after the control signals that I did not) because I do not have the ability to repair single-chip microcomputer. IBM to take into account the protection of the BB more perfect, is about to run out of battery power will automatically shut down when, this battery is intended to be used for entertainment, therefore, need not be too concerned about, so I decided to shake the hp battery protection circuit, directly depend on BB’s protection circuit. SCR is in the input and output pin (that is, cathode circuit board input and output pin) between the solder on a small 2A fuse, fuse 2A select the reason is based on current usage, the largest in the computer power consumption , the current does not exceed 1.9A, 2A capacity sufficient unusual circumstances (for example, short-circuit accident) but also to ensure that the fuse of the time, but also play a role in protection.

In fact, directly to the SCR control terminal so that it can also be a high turn-on, but taking into account the current the battery must be a reason to burn, and the reasons for the identification of protective measures taken before or better in order to avoid greater loss.

Well, the battery power has been the first non-stick, and on the machine to try it! Normal boot, plug in the power immediately after the charge on the flashing lights are up, the way when charging the battery with a random look at battery information management software, was also displayed, the battery circuit board This shows that the single chip is still working.

Batteries battery is a Panasonic, the time the factory in June 2000, the first time in October 2000, the design capacity of 38.88Wh, the current capacity 38.88Wh, is charging cycle: 0 times.

Oh, do not know how to engage in, the inspiron 1300 battery may be burned when burning confused, even cycles to the zero, Now it maybe a new battery.

Repair battery step two : repair battery shell

Points and then encountered trouble: it was soon filling power (twice as fast than normal), in the course of discharge to 70% of the time will suddenly prompt “The battery is dead, please insert the AC power supply” warning capacity to show an immediate 5%. The beginning of a long time thought it was not using the battery leads to memory effect, we should do like a few of the deep cycle. But after several full charge, after release and found that the improvement is very small, only about 45 percent take power, with half an hour, we still have the problem. The largest may be the Inspiron 1520 battery pack in more than one section or “black sheep” in trouble, have to pull it out!

Red several times in the subsequent discharge cycle every place is full of electricity and have finished after the battery power to open, measuring the voltage of each battery pack to find a group of “different”: the per-charge when it voltage to reach 4.2V or even more than the first, leading to cessation of the entire VGP-BPS2 battery charge, and discharge when it was first to reach 3.6V or even less, is a typical decline in capacity. And the largest of which may still be a battery problem. This group of cells separated from the measurement of voltage, respectively, found that a battery voltage is low, only about 3.2V, a separate charge of their voltage quickly reach 4.2V, less than a minute of time, The A1185 battery basically has no capacity to speak with a light bulb when the discharge was found, it has the fundamental output current that can not provide even less than 1mA, measuring its resistance, has reached more than 2K seems to have been scrapped.
As a result of a “shock therapy” after the restoration of the normal cells, but not charging voltage reached 4.0V, it seems that it is “the pot boiled dumplings – do not put out an electric” soldering it back a battery discharge followed by the use of time of up to 90 minutes, has been near normal level of the battery.

However, when the charge is quickly filled, and disturbed mind up soon. Was a discharge, it is less than half an hour, open a test, just fix the bad and the battery.

Not always have to use a “heart to recover,” ah, so the value on the lost.

This section of the final decision to do a battery operation, and then they can not, then replaced the batteries. Peeling of the batteries, removed the insulation near the cathode cap and found a slight corrosion around, but I do not like battery leakage and traces, as well as save. With halogen lamp from the battery positive and negative, there is no response Taking into account the previous “Anatomy” the same symptoms when the batteries are inside the battery with the battery cathode output between cathode cap (the pressure on, not welded) oxide occurred, resulting in increased resistance and end-of-life battery , and the internal battery is still good. Oxide layer in the case is not serious as long as the battery cap to strengthen the internal contacts and battery resulting in the battery does not leak if damaged can be restored. The simplest way is to step up the battery forceps are negative (one pad insulation film), while measuring the inspiron E155 battery output voltage (or current), while vertical extrusion batteries, once the battery output voltage is increased, the current increase (the change is often the jumping in nature, relatively large changes) to stop immediately, the battery will be able to repair.
The top edge of the battery cathode cap next to the mouth ventilation valve with cutting pliers, then immediately measured and found that the battery has been restored, the output current increases immediately. In order to insurance purposes, the battery cap in the week between the edge of the chisel a few more in order to increase the contact area to ensure that the use of effects.

The battery to re-wrap, solder back to the XPS M1210 battery pack, charge, discharge. The use of time to reach more than 90 minutes.

Again measured with test software and found that the current capacity of smaller 38.88Wh from the original into a 32.07Wh, a decrease of nearly 20 percent, but this is the real discharge process, there is no jump of dropped. After several red discharge cycle, the capacity has increased by some. Use has been made to the current two months, everything will be all right.

TrackBack : Blogmyway Unblog

Use different stand to cooling the laptop

Use different stand to cooling the laptop

If your latop’s cooling system is working properly, you can still do more. Strange fact is that when you use a laptop with a laptop battery on your laptop, you always ask for laptop overheating. Any soft objects may be blocking the cooling system of the ventilation holes. It also can cause heat to get caught underneath the unit. That is why people would burn their laptop.

However, heat buildup can even happen when the laptop sits directly on a desk using a laptop battery.

There are different ways to avoid this buildup. A latop stand to keep the bottom of the notebook and your use of the surface of the table some distance intervals in Apple A105 and Apple A1079,. It created the basic space, the heat can disappear. A type of stand are usually flat, legs are short, thin surface of the type, you can lay in your lap or desk. With an air-inch notebook PC 2, the heat can easily escape, and the airflow through the vents have been completely open.

Sometimes, a stand may be caused by an act of special materials such as aluminum heat in Inspiron 1100 Battery,. This device will actively utilize heat out of notebook cooling further assistance. Another approach is to a laptop pad or pad. In this approach, we hope that with the aluminum heat sink, you put the device active thermal management surfaces. This could mean that trap heat insulation pad notebook coming out to protect your lap. It could also mean that, on the positive development of built-in cooling fan out of thick pad.

Although you can from any electronics store or retailer to buy dozens of these cool online tools for your Inspiron E1505 Battery, one of the things you might at home, and now you can use. A small strip camping tables can be used as a stand notebook. Therefore, we can use large baking rack (can be used for cooling cookies) to do a stand.

One thing to remember is that the heat characteristics of your laptop are always changing, depending on age, environment and power usage. So even if you get yourself the perfect cooling setup, you might want to install some sort of heat-monitoring software in PA3450U-1BRS, PA3451U-1BRS. It’ll help you be more aware of your laptop’s fluctuating temperatures and learn how different situations can increase the heat.

The article is from laptop battery blog

How to clean notebook cooling system

How to clean notebook cooling system

My main computer is a HP zv5000 battery- it uses the fan and heat sinks to cool the processor. By using these heat sink (copper?), And piping to collect a lot to reduce the cooling capacity of the machine a little dust. If you do not have this particular machine, do not worry. To use some common sense as long as the basic idea is the same.

Steps 1Tools and supplies a first step

You need two things: Q technique and a screwdriver you first remove the battery (which may be really good! Step, but thoroughly). Unscrew the cap Ram – in order to easily remove the other cover. You need to remove the plastic cover behind the battery button – to delete any necessary screws and retain traces of where they came from (I have some longer than usual)

Fan-step 2 Removing bile duct / month

Carefully remove the plastic shell. It should not be very strong – if very tight, go back and look for missing screws. Now, we have to eliminate some small screws to hold these two lovely task of duct fan / month. I use a magnetic prompted a # 1 screwdriver. It saved my tools, because I can easily drop or lose those screws as laptop battery.

Step 3 Clean

Use your Q-corner and wipe away any dust off the fan blades, etc. from the heat sink. I think you could use some compressed air, but I do not have any and can be everything. When you’re done, re-assembly, start the notebook with your HP laptop battery.

The article from laptop battery blog

The secrets of battery runtime

The secrets of battery runtime

Is the runtime of a portable device directly related to the size of the laptop battery? The answer should be ‘yes’ but in reality, the runtime is governed by other attributes than the specified capacity alone.

This paper examines the cause of unexpected downtime and short battery service life. We look at four renegades – declining capacity, increasing internal resistance, elevated self-discharge and premature voltage cut-off on discharge. We evaluate how these regenerative deficiencies affect nickel, lead and lithium-based batteries. Declining capacity The amount of charge a laptop battery can hold gradually decreases due to usage and aging. Specified to deliver 100% capacity when new, the battery should be replaced when the capacity drops to below 80% of the nominal rating. Some organizations may use different end-capacities as a minimal acceptable performance threshold.

The energy storage of a battery can be divided into three imaginary sections consisting of: available energy, the empty zone that can be refilled, and the unusable part (rock content) that increases with aging. Figure 1 illustrates these three sections.

Figure 1: Dell laptop Battery charge capacity.Three imaginary sections of a battery consisting of available energy, empty zone and rock content.

In nickel-based batteries, the so-called rock content is present in form of crystalline formation, also known as memory. Restoration is possible with a full discharge to one volt per cell. However, if no service is done for four months and longer, a full repair becomes increasingly more difficult the longer service is withheld. To prevent memory, nickel-based batteries should be deep-cycled once every one or two months. Nickel-cadmium and nickel-metal-hydride batteries are used for two-way radios, medical instruments and power tools.

Performance degradation of the lead-acid battery is caused by sulfation and grid corrosion. Sulfation is a thin layer that forms on the negative cell plate if the battery is being denied a fully saturated charge. Sulfation can, in part, be corrected with cycling and/or topping charge. The Battery grid corrosion, which occurs on the positive plate, is caused by over-charge. Lead-acid batteries are used for larger portable devices and wheeled applications.

Lithium-ion Toshiba laptop batteries lose capacity through cell oxidation, a process that occurs naturally during use and aging. The typical life span of lithium-ion is 2-3 years under normal use. Cool storage a 40% charge minimizes aging. An aged lithium-ion cannot be restored with cycling. Lithium-ion is found in cell phones and mobile computing.

Increasing internal Resistance The capacity of a battery defines the stored energy – the internal resistance governs how much energy can be delivered at any given time. While a good battery is able to provide high current on demand, the voltage of a battery with elevated resistance collapses under a heavy load. Although the battery may hold sufficient capacity, the resulting voltage drop triggers the ‘low battery’ indicator and the equipment stops functioning. Heating the battery will momentarily increase the output by lowering the resistance.

A battery with high internal resistance may still perform adequately on a low current appliance such as a flashlight, portable CD player or wall clock. Digital Camera battery equipment, on the other hand, draw heavy current bursts. Figure 2 simulates low and high internal resistance with a free-flowing and restricted tap.

Figure 2: Effects of internal battery resistance.A battery with low internal resistance is able to provide high current on demand. With elevated resistance, the battery voltage collapses and the equipment cuts off.

Nickel-cadmium offers very low internal resistance and delivers high current on demand. In comparison, nickel-metal-hydride starts with a slightly higher resistance and the readings increase rapidly after 300 to 400 cycles.

Lithium-ion has a slightly higher internal resistance than nickel-based batteries. The cobalt system tends to increase the internal resistance as part of aging whereas the manganese (spinel) maintains the resistance throughout Apple laptop battery life but loses capacity through chemical reaction. Cobalt and manganese are used for the positive electrodes.

High internal resistance will eventually render the battery useless. The energy may still be present but can no longer be delivered. This condition is permanent and cannot be reversed with cycling. Cool storage at a partial state-of-charged (40%) retards the aging process.

The internal resistance of Lead-acid batteries is very low. The A1175 A1185 battery responds well to short current bursts but has difficulty providing a high, sustained load. Over time, the internal resistance increases through sulfation and grid corrosion.

Elevated self-discharge

All HP laptop batteries suffer from self-discharge, of which nickel-based batteries are among the highest. The loss is asymptotical, meaning that the self-discharge is highest right after charge and then levels off. nickel-based batteries lose 10% to 15% of their capacity in the first 24 hours after charge, then 10% to 15% per month afterwards. One of the best batteries in terms of self-discharge is Lead-acid; it only self-discharges 5% per month. Unfortunately, this chemistry has the lowest energy density and is ill suited for portable applications. lithium-ion self-discharges about 5% in the first 24 hours and 1-2% afterwards. Adding the protection circuit increases the discharge by another 3% per month. The protection circuit assures that the voltage and current on each cell does not exceed a safe limit. Figure 3 illustrates a battery with high self-discharge.

Figure 3: Effects of high load impedance.Self-discharge increases with age, high cycle count and elevated temperature. Discard a battery if the self-discharge reaches 30% in 24 hours.

The self-discharge on all battery chemistries increase at higher temperatures. Typically, the rate doubles with every 10°C (18°F). A noticeable energy loss occurs if a battery is left in a hot vehicle.

Aging and usage also affect self-discharge. nickel-metal-hydride is good for 300-400 cycles, whereas nickel-cadmium may last over 1000 cycles before high self-discharge affects the performance. An older nickel-based Sony laptop battery may lose its energy during the day through self-discharge rather than actual use. Discard a battery if the self-discharge reaches 30% in 24 hours.

Nothing can be done to reverse this deficiency. Factors that accelerate self-discharge are damaged separators induced by crystalline formation, allowing the packs to cook while charging, and high cycle count, which promotes swelling in the cell. Lead and lithium-based batteries do not increase the self-discharge with use in the same manner as their nickel-based cousins do. Premature voltage cut-off Not all stored battery power can be fully utilized. Some equipment cuts off before the designated end-of-discharge voltage is reached and precious battery energy remains unused. Applications demanding high current bursts push the battery voltage to an early cut-off. This is especially visible on iBook G4 battery with elevated internal resistance. The voltage recovers when the load is removed and the battery appears normal. Discharging such a battery on a moderate load with a battery analyzer to the respective end-of-discharge threshold will sometimes produce residual capacity readings of 30% and higher, jet the battery is inoperable in the equipment. Figure 4 illustrates high cut-off voltage.

Figure 4: Illustration of equipment with high cut-off voltage.Some portable devices do not utilize all available battery power and leave precious energy behind.

High internal battery resistance and the equipment itself are not the only cause of premature voltage cut-off – warm temperature also plays a role by lowering the battery voltage. Other reasons are shorted cells in a multi-cell battery pack and memory on nickel-based batteries.

The article is from http://www.batteryuniversity.com/

old PC in 10 cheap and easy upgrades

10 **Better** cheap and easy upgrades for your old PC

In response to a submission on digg.com entitled “10 cheap and easy upgrades for your old PC”, user gaqua posted a “better” list in the comments that I found funny enough to want to give it its own post on my meaningless blog.

Here’s a better list.

1 – Clean up your shit, dad. I’m tired of coming over and finding a new toolbar on IE or Firefox every time. I’m tired of thirty icons in the systray, half of which have some bizarre relevance to programs that are no longer installed. Go to add/remove programs, and remove anything you don’t use in your Apple Powerbook G4 battery.

2 – Defrag that shit. 74% fragmented. SERIOUSLY? How is that even possible? I’m scheduling this for every Wednesday night at 10pm dad. I know it’s going to freak you out when it starts doing this all on its own but just leave it alone and let it do its magic.

3 – 512MB of RAM? Do you know how cheap RAM of VGP-BPS2C is? PC2700 DDR1? Oh my God…I think I might throw up. For $50 I can get you to 2GB of RAM. $50.

4 – I’m installing Ad-Aware and Spybot Search & Destroy – your system has over 200 known spyware problems. I’m fixing them. I’m making this Inspiron 6000 Battery bulletproof. Don’t fuck with it anymore. I’m installing AVG anti-virus. It’s going to ask you to update it – UPDATE IT WHEN IT ASKS.

5 – Holy shit I can’t believe this – you’re running XP without even SP1 installed. I’m installing SP3 for D5318 Sony NP-BG1, Dad. It’s a lot more secure. Jesus christ this is like the dark ages of computing.

6 – Oh fucking shit – 3 hours to download? What the fuck – you’re still on that 512k DSL? Mom is paying for Cable! She’s paying for Cable internet, Dad. I’m going to unplug this wire from the DSL modem and plug it into the cable modem of A1175 A1079. Yeah. No it’s very easy. And I’m calling AT&T and canceling DSL. There, I just saved you $50 a month. And yeah, the internet is faster.

7 – Oh look 360tyj.com, you have a cutesy animated desktop background. Yeah, your celeron 1.6 GHz probably doesn’t like that, especially with the 16MB integrated graphics. I’m going to turn that off. I know, I know. But it’s best for everyone.

HOLY SHIT YOUR COMPUTER IS FASTER NOW DAD. Please, tell everyone in the family that you “don’t know what he did but the computer is so much better, you should call him and have him come take a look, I’m sure he’d be happy to Latitude D600 battery!”

There’s nothing I love more than that, dad. I love fixing Uncle Butch’s disgusting laptop with the inexplicably stained keys and I love playing around with the disgusting beige eMachine that Aunt Patsy uses to send all those cool inspirational email forwards with pictures of kittens or penguins or koalas or pandas.

No, I understand. As the oldest and most computer knowledgeable of Latitude D620 battery , it’s my responsibility. Just like Uncle Mason would help us all out if we got into legal trouble right? Well, if he weren’t disbarred for fraud, I mean.